Latest Blog Posts for Printing tips

• Troubleshooting Dot Matrix Printers
  on Nov 15, 2009 in printer windows printing
  If the printer self-tests OK but will not print jobs from the computer, check the following: Dip switch settings Proper driver for your application software Bad or disconnected cable Some printers have both serial...
• Troubleshooting Laser Printers
  on Nov 11, 2009 in printer windows printing
  Be sure all dip switches are properly set for your configuration. Laser configuration is sometimes done by a control panel of buttons with an LED display that permits you to alter configuration memory. Be sure that the application being used is prope...
• Port Settings
  on Nov 11, 2009 in printer windows printing
  Poor communication between the printer and the computer may cause garbled printing or printer error messages. This may be caused by incorrect parallel port configuration in the computer setup utility. Below is a list of some of the common parallel po...
• General Printer Troubleshooting
  on Nov 10, 2009 in printer windows printing
  Make sure the printer has power and is on-line. If you are using a manual printer sharing device, make sure the switch is set to activate the correct printer. Turn it off and on again to reinitialize any internal settings that may have gone astray...
• Draft Printing
  on Nov 9, 2009 in printer windows printing
  Q: Every time I go to print seems to take longer than it used to—a lot longer. Is there a way to get my quick printing back? A: Most likely your printer settings got changed from "draft" to "best". I know because I did...
• Ink Refills Debate
  on Nov 3, 2009 in printer windows printing
  You want to save some money by buying ink refills. Because I get asked about this a lot, here's my opinion. Well, in general I recommend not using refills. They are probably OK for printers with ink nozzles that are NOT built into the cartridge (lik...

{pvComments::user_name}

{pvComments::date}

Delete 

{pvComments::comment}

Post a Comment